so i tried to replace the radio in my 2017 Kia Sorento, it wasn’t too bad. first i had to take off the trim panel on the passenger’s side, each screw’s hiding behind some foam tho. and i removed a few more screws once it was off. then i unplugged the old radio, made sure the car was off lol.
installed the new one, bolted it in place, and snapped the trim panel back. easy peasy! but i forgot to check if the steering control worked at first! did you have to do anything extra for the steering control? what about those pesky wiring harnesses? hope it went smoothly for you
I’ve tackled my ‘17 Sorento radio swap in Toronto myself n’ it was smoother than I thought. Gathered the right tools, uou got everything set first time around! Don’t have mates helping me but I did manage. Spacious garage handy for assembly of stuff. Remember to chill, it’s pretty straightforward if the video instructions are clear!
I remember trying to swap out my '17 Kia Sorento radio in Chicago; it was a beast! First off, busted knocks when getting under there—was like doing a puzzle without the cover. I had to unplug a buncha connectors and remove some trim bits. Not easy-peasy, but super satisfying finishing that. Got my tunes loud again and clear—how sweet is that? Keep at it!
I had to replace my 2017 Kia Sorento radio in Toronto last summer. Thought it be a breeze, but navigation through that panel was trickier than finding maple syrup at a diner. Youtube tutorials saved my bacon! Such a headache but totally worth for the perfect sound.
I tried replacing my 2017 Kia Sorento radio in Toronto myself. A bit of a pain to get it all off, warning labels everywhere! Found some good Insta vids to guide me through. Took a couple of beers and time, but it paid off when I customized it. Tips from Reddit really helped!
I had a buddy in Toronto who tackled his 2017 Kia Sorento radio swap by himself—reckon he’s sly like that. First up, unplugging the battery to keep things chill. Then he wrestled out the old radio, took his sweet time on wiring, and plopped in the shiny new one. Yeah, had a tiny slip-up with the dash. But hey, that’s DIY for ya, amirite? Got it all good in the end. Cheers to learning!
I had to replace my '17 Kia Sorento radio down in Austin, Texas—real headache but worth it. Followed a YouTube vid, and dang if it wasn’t pretty slick. Found some wires were a mess in there hah. Got recommendations for extra tools, too! Saved a bundle doing it DIY style.
I tried replacing my '17 Kia Sorento radio up in Toronto last month. First step’s popping out that old one, real meticulous here though, gotta label wires. Installation’s easy peasy after that, and hey, found some sweet features in the new unit! Just remember – patience is key, trust me, fingers crossed else things get borked up real quick.
I’ve replaced the radio in my 2017 Sorento here in Canada. It was easier than I thought! Gather tools, turn off power, disconnect old unit, slide in the new one—it’s a breeze. Perk: saved cash on the mechanic quote! So relaxing on the weekend project!
Had to replace my 2017 Kia Sorento’s radio last week here in Edmonton. First thing, I checked YouTube tutorials - they were super helpful. I used a trim removal tool to pull off the dash panels without breaking anything. Took me a couple of hours, but I was cracking jokes the entire time to keep the mood light. I’ve got to say, it was a pretty satisfying DIY project. Keep calm and DIY on!
So, I was in Toronto replacing my 2017 Kia Sorento radio. First, I pulled the fuse for the radio—can’t forget that step, ha! Next, I removed those pesky trim pieces with a plastic tool, so no scratches. Figuring out the wiring harness took a bit, but YouTube was clutch. Everything went smooth tho. I’ve got mine back now, all jazzed up with the new unit. Seriously, do it yourself if ya dare!
I once had to replace my 2017 Kia Sorento radio in Toronto, and lemme tell ya, it was a project. Between figuring out the trim and wrestling with wiring, I thought I’d gone back to school. Luckily, I had YouTube and a manual – basically tech support for car geeks. My buddy helped, and we finished it by dusk, phew!
In Ontario, I’ve tackled replacing the 2017 Kia Sorento radio myself. First, disconnect the battery, then pop the radio out with a trim tool—careful not to scratch. I have the dash cover off now, hiding inside is magic! Read instructions if you’re unsure, but patience gets you through. Keep calm and DIY on!
I’ve lived in Detroit and tackled replacing my 2017 Kia Sorento radio myself. Found some great YouTube tutorials to guide me through each step. Wiring was a pain but totally doable. Saved loads! Anyone else DIY or went pro? Share your method!
I’ve been lookin’ to replace my 2017 Kia Sorento radio here in Texas. It’s tricky but doable—mostly you need the right tools. Watched a couple YouTube tutorials, super handy. Took forever, but getting there!
I’ve been in the garage swapping out a 2017 Kia Sorento radio here in Canada. It’s not as tough as it looks! First, grab the right tools and some patience—no drama! Wrap the connectors for safety. Once it’s in, basics like a smoke test to check connections and fiddling with settings. Not rocket science, but gotta be careful!
Hey, in Toronto, I had to swap my Sorento’s radio last year. Bit of a pain 'cause wires were all tangled. Figured I could DIY but ended up calling a pro. Gotta get it right, you know? Save the frustration!
In Toronto, I’ve replaced my 2017 Kia Sorento radio - pretty intense! Started with a quick YouTube guide. First accessory, then popped off the dash trim - felt like a puzzle. Got the new radio in, connected easy. Just gotta mess with some coding using an app. Man, relieved to blast my fave tunes now without AUX! Tight work, all done in a day!
In Denver, I had to swap out my '17 Sorento radio myself. First, gotta pop the dash panels – careful not to crack anything. I search for a manual online, and it saves the day. Tool up with the right screwdrivers; it’s a total EASY BREEZY DIY project. Just takes patience, and you’re good to rock your new tunes!
So, I had this crazy adventure in Toronto replacing a 2017 Kia Sorento radio. Figured it’d be simple—yeah, right. First step was getting the right part, which was a bleedin’ hassle. Then, I had to tackle the flashy plastic trim around the dashboard. Almost gave up, but power tools saved the day—an epic win if I say so myself.
So relaxing on the weekend project!