so, replacing the radiator support on a 2009 corolla isn’t super hard, but it can be a bit annoying. I did it last summer after my buddy backed into my car. not the best day, I tell ya.
first thing you gotta do is remove the front bumper. it’s like peeling a banana but harder. you’ll also need to take off headlights and maybe some other junk in the way. But be careful, those clips can be tricky.
next, unbolt the support from the frame. you’ll probably need some ratchet wrenches and a friend to hold things steady. Did you have a helper? It def helps.
once you got the new support in, make sure everything lines up right or you’ll be crying later. then reassemble everything in reverse, kinda like putting together a puzzle but with more swearing. good luck with it
In my experience, replacing the radiator support on my 2009 Corolla was tough but rewarding! I ve found that watching step-by-step videos makes it easier. Just be patient and take your time; you’ll get there!
Oh man, I ve been there with my '09 Corolla! When I replaced the radiator support last summer, I was working in my garage in Ohio, and it was a bit of a challenge. Just make sure you have the right tools and watch some how-to videos first. It’s totally doable if you don’t mind getting your hands dirty. Good luck, you’ll feel so accomplished once it’s done!
Replacing the radiator support on my 2009 Corolla was a bit tricky at first. I’ve done a few repairs before, but this one in my garage in Oregon tested my patience! Just take your time, you’ll be fine!
I’ve done this on my 2008 Corolla in Ohio, so I feel your pain! It can be tricky, but with the right tools, it’s doable. Just make sure to take your time and keep track of all the bolts. Good luck, you got this!
Replacing the radiator support on my 2009 Corolla was a bit of a pain here in Michigan. I ve done a lot of DIY fixes, but this one took me a whole weekend. Make sure you have the right tools and maybe get a buddy to help out—it’s tricky with those tight spaces! Good luck!
I’ve done it on my 2009 Corolla in California. It’s tricky but totally doable with the right tools! Good luck!
Replacing the radiator support on a 2009 Corolla isn’t too bad! I’ve done it myself in my garage in Ohio. Just be careful with the bolts; they can be rusted on pretty tight. I had to use a breaker bar! Definitely worth saving the cash on labor!
When I tackled my 2009 Corolla’s radiator support a few months back in California, it was pretty straightforward! I ve watched a bunch of YouTube videos beforehand, which helped alot. Just make sure to have the right tools and patience. It can be a bit tricky, but I promise the satisfaction after is worth every effort you put in! Good luck!
Ive done this on my buddy’s 2009 Corolla out in Ohio, and it was quite the project! Start by removing the front bumper and any attached elements, then you can unbolt the old radiator support. It’s a bit tricky but totally worth it if you’re doing a DIY! Just make sure to have a friend help you hold things in place. Happy wrenching!
Replacing the radiator support on my 2009 Corolla was a bit of a pain in the neck, but totally doable! I’ve found that having a buddy there helps a lot, especially when you’re under the hood. Good luck with it!
Replacing the radiator support on my 2009 Corolla was tough! I ve done it in my garage. Patience is key!
I’ve done a radiator support swap on my 2010 Corolla out here in Ontario, and it wasn’t too bad! Just needed basic tools and some patience. I really recommend taking pics before you disassemble everything, it helps when putting it back together. Good luck, you’ll got this!
I ve done this on my sis’s 2008 Corolla in Michigan, and it wasn’t too bad! Just make sure to have the right tools ready, takes a lil patience. Good luck!
Honestly, I’ve had to replace mine on my 2008 Corolla a few years back. It was a pain, but totally worth it! I found a decent guide on YouTube. Just remember to have the right tools and take your time—it’s tricky but learning something new is so satisfying! Good luck!
I’ve tackled a few radiator support replacements before, and honestly, it’s not too bad once you get into it! Just make sure to have the right tools handy. Good luck with your Corolla!
In my experience, replacing the radiator support on my 2009 Corolla was a bit of a pain, but totally doable! I did it last summer in the garage in Toronto. You gotta use jack stands to hold up the front end, and I ve heard taking off the bumper makes things a lot easier. Just take ur time, and it’ll save ya a lot of money compared to a shop!
Living in Michigan, I ve tackled this job on my 2009 Corolla a couple years ago. You ll want to start by removing the bumper and headlights first—definitely a little tricky but worth it. I found some great videos online that helped a ton! Just make sure you have all the right tools ready. Once you get the old support out, it’s smooth sailing! Good luck!
I ve replaced the radiator support on my 2008 Corolla down in Florida, and it was a bit tricky! You’ll need some special tools and definitely a helper. Taking out those bolts took way more time than expected! But once I got it off, the new one slid right in. Good luck!
I’ve replaced a radiator support on my friend’s 09 Corolla in Texas. It was a bit tricky, but with some patience and basic tools, it turned out great! Definitely worth saving on labor costs.